how to change a water cooler jug
As you dispense water into your cup something must replace the water or the bottle will collapse from the pressure of the surrounding air. About Us Trending Popular Contact.
Hot And Cold Tap 22l Water Cooler Purifier Dispenser With Replacement Filter Water Cooler Replacement Filter Water Spout
This is the best way to change your 5 gallon as I have never had to clean up any spills and it is really a simple and speedy process.
. Tilt it to a 45-degree angle and allow water to start dripping into the cooler. First you need to remove the sticker label that is on the lid of the bottle. Remove the cap or tab from waterbottle.
Im not responsible if you spill all your water out because it fai. Wait for cooler to be partially emptied before refilling. Once the bottle is on the chair take the cap or tab off of the neck and lift the bottle up to the water cooler.
How do you change a water cooler. Herein how do you change a water bottle dispenser. Lift the bottle up and slowly tip it to a 45-degree angle to allow water to begin dripping into the cooler.
A quick video on a trick i use to get the water jug onto our cooler without spilling water. Keep yourfeet shoulder-width apart and one foot slightly in front of the other. Here is the easy way to replace a water cooler jug without spilling water everywhere.
A guide how to change the water bottle of water dispenser. Now if you are able to lift the 5 gallon with ease what I do is I put the opening of the bottle on my palm flipping it on my palm and then letting the water fill up at the top and then letting it sit. The float descends as the water level drops opening a valve that allows more water to flow in automatically.
As water leaves the bottle filtered air replaces it. Next you need to place one hand on the neck of the bottle and place the other on the handle of the bottle. To remove the bottle from the cooler grab the handle and lift the bottle straight up from the cooler by doing this the bottle will be removed from the cooler.
As the flow of the water into the cooler starts to increase tip the bottle into an upright position and then secure it perfectly onto the base. Bend down to a comfortable posture. If theres no chair or table near the water cooler place a sturdy chair next to the cooler to provide a break in between.
Then remove the water jug from the top and locate the coils on the inside. Why does my water cooler bottle collapse. Then to lift the bottle onto the cooler youll want to get yourself into a strong position with your feet shoulder width apart straight back and squatting down.
You dont need any tools or special adapters. Insert the Water Bottle in the Cooler Lift the water bottle from the chair and rest it against the top of your water cooler. Step by step instructions with reward at the endThe video is available in 3D at httpsyoutube.
Stand up slowly using your legs to push up and put the bottle on the chair mentioned in step 1. Step 1 - Unplug and Clean Always unplug your water cooler dispenser before doing any repair or maintenance on it. Set the bottle down on the chair next to the cooler and remove either the cap or the tab from around the neck depending on the type of bottle you have.
Bend down to a comfortable posture. What are the three layers of the ureter. Remove the cap or tab from water bottle.
Once the bottle has been removed place it in a safe and accessible spot so that our drivers will be able to collect the empty bottles on your next delivery. You will find more than one if you have a dispenser with both hot and cold spouts. Grasp the bottles neck with your dominant hand and support bottom of bottle with the other hand.
How to Safely Change a 5-Gallon. As you lift the water bottle up place it at a 45-degree angle to start the flow of water into the cooler. Keep your back straight lift and place the water bottleonthechairtable.
